Abstract
The flash-photolysis time-resolved microwave conductivity technique (FP-TRMC) has been used to study photoinduced charge separation in bilayers consisting of a smooth, transparent, 80 nm thick layer of anatase TiO2 onto which poly(3-hexylthiophene) (P3HT) sensitizer layers have been spin-coated. Interfacial charge separation, resulting from excitation of the polymer in the visible, is found to persist well into the millisecond time domain. Photoconductivity action spectra have been measured between 420 and 700 nm for P3HT layer thicknesses, L, from ∼2 to 200 nm. Using this electrodeless technique, the bilayers could be irradiated from either the polymer ("front") or semiconductor ("back") side. On front-side irradiation at 540 nm (close to the absorption maximum of the polymer), the efficiency of charge separation per incident photon (IPCSE) initially increased to a maximum value of 0.8% for L ≈ 10 nm. For thicker layers the IPCSE gradually decreased, eventually to 0.1% for L ≈ 170 nm. On back-side irradiation the IPCSE increased over the first 10 nm to a value close to the maximum found for front-side irradiation, and decreased only slightly for further increase in layer thickness. Analytical expressions for the thickness dependence based on exciton diffusion with a Lambert−Beer excitation profile have been used to fit the experimental data. Best fits were obtained for an exciton diffusion length, Λ (=√(Dτ) with D the diffusion coefficient and τ the natural lifetime), of 5.3 or 2.6 nm depending on whether excitons were taken to be reflected or quenched at the polymer/gas interface, respectively. The IPCSE decreased at high light intensities; an effect that is attributed to the occurrence of exciton−exciton annihilation within the polymer layer.
Keywords
Affiliated Institutions
Related Publications
Effect of Different Hole Transport Materials on Recombination in CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Perovskite-Sensitized Mesoscopic Solar Cells
We report on perovskite (CH3NH3)PbI3-sensitized solid-state solar cells using spiro-OMeTAD, poly(3-hexylthiophene-2,5-diyl) (P3HT) and 4-(diethylamino)benzaldehyde diphenylhydra...
Photooxidative self-cleaning transparent titanium dioxide films on glass
In the context of studying the feasibility of photocatalytically self-cleaning windows and windshields, clear, abrasion resistant, photocatalytic films of TiO 2 were formed on s...
Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures
We investigate the exciton dynamics in composite systems of conjugated polymers and fullerene molecules by photoluminescence (PL) and femtosecond transient absorption experiment...
Adsorption and Photooxidation of CH<sub>3</sub>CN on TiO<sub>2</sub>
The adsorption and photooxidation of CH3CN chemisorbed on TiO2 has been investigated using infrared spectroscopy. It was found that CH3CN forms an ice layer on TiO2 at 126K and ...
Understanding the Improved Electrochemical Performances of Fe-Substituted 5 V Spinel Cathode LiMn<sub>1.5</sub>Ni<sub>0.5</sub>O<sub>4</sub>
Partial substitution of Fe for Ni alone or both for Ni and Mn in the 5 V spinel cathode LiMn1.5Ni0.5O4 and been investigated by characterizing the samples by X-ray diffraction (...
Publication Info
- Year
- 2003
- Type
- article
- Volume
- 107
- Issue
- 31
- Pages
- 7696-7705
- Citations
- 353
- Access
- Closed
External Links
Social Impact
Social media, news, blog, policy document mentions
Citation Metrics
Cite This
Identifiers
- DOI
- 10.1021/jp0217738